Titanium Stock Grade 5 & 25 are the two grades of titanium.
Titanium Grade 5 offers high strength and toughness as well as good weldability and formability. This is not a cold formable grade and also considered an aerospace-grade.
Titanium Grade 25 has a low melting point and good strength.
Both these grades have good strength, a high degree of heat, and wear resistance, and environment-friendly properties. They are used for different applications such as
Titan Alloys has huge Titanium Stock Grade 5 & 25 available in several different pre-cut ready to ship sizes as well as custom cut sizes as per your requirements. You can buy online by placing the order as per your requirement and it will be shipped to you immediately. We ensure the good quality of the products at the market competitive prices.
Specifications:
Titanium Stock Grade 5, ASTM B265 /ASME SB265, ASTM B338 / ASME SB338, ASTM B348 / ASME SB348, AMS 4928, MILT 9047, UNS R56400, UNS R56401 (ELI), Ti-6-4, Ti6Al4V, Ti64,6-4 Titanium, 6-4,
Chemical Composition
Element |
Percentage |
Titanium, Ti |
Balance |
Oxygen, O |
0.20% (Max) |
Carbon, C |
0.10% (Max) |
Nitrogen, N |
0.05% (Max) |
Iron, Fe |
0.40% (Max) |
Hydrogen, H |
0.0125% (Max) |
Aluminum, Al |
5.50-6.75% |
Vanadium, V |
3.5-5% |
Mechanical Properties
Tensile Strength, Ultimate |
131000 psi |
Tensile Strength, Yield |
120000 psi |
Elongation at break (in 50 mm) |
10% |
Brinell Hardness |
334 |
Melting Point |
2919-3020?F |
Density |
4.43 g/cm? |
Physical Characteristics
Weldability |
Good |
Corrosion Resistance |
Excellent |
Wear Resistance |
Poor |
*Data provided for the purpose of reference only.
Specifications:
Titanium Stock Grade 25, ASTM B265 /ASME SB265, ASTM B338 / ASME SB338, ASTM B348 / ASME SB348, UNS R56403
Chemical Composition
Element |
Percentage |
Titanium, Ti |
Balance |
Oxygen, O |
0.20% (Max) |
Carbon, C |
0.10% (Max) |
Nitrogen, N |
0.05% (Max) |
Iron, Fe |
0.40% (Max) |
Hydrogen, H |
0.0125% (Max) |
Aluminum, Al |
5.50-6.75% |
Vanadium, V |
3.5-5% |
Mechanical Properties
Tensile Strength, Ultimate |
130000 psi |
Tensile Strength, Yield |
120000 psi |
Elongation at break (in 50 mm) |
10% |
Melting Point |
2830?F |
Density |
4.5 g/cm? |
Physical Characteristics
Weldability |
Good |
Corrosion Resistance |
Excellent |
Wear Resistance |
Poor |
*Data provided for the purpose of reference only.